Hot
Equipo de refrigeración compacto comercial de techo de INTARCON

intartop PRO R290

Compact refrigeration unit

Compact units designed for mini refrigeration and freezing chambers with R290.

Request technical advice

Description

New roof-top monoblock PRO, designed by and for technicians. For small and medium refrigeration and preservation cold rooms.

  • Coils with protection: Tube and fin evaporator coil with cataphoresis treatment and microchannel condenser coil with polyester paint treatment.
  • Electronic fans: Electronic fans with speed regulation in the condenser, reducing energy consumption as well as noise.
  • Washable air filter: Accessible from the outside to avoid soiling of the condenser and the interior of the unit.
  • Front register the removable of evaporator: Front panel with fans that can be access from the front of the equipment, to clean the coil and drain pan if the equipment is positioned between shelves. Ease of maintenance on all elements of the equipment.
  • Hot gas defrost: Closes the liquid line, reducing defrost time and, consequently, with less start-up time and unit consumption.
  • Electrical panel and Connectors: Electrical panel with front access. All protection and electronic control elements integrated. Terminal connection of the elements. All electrical elements use connectors that make them easy to replace.
  • Drain pan: Condensate evaporation tray, accessible from the outdoor unit and removable. Made of stainless steel. Allows cleaning, as well as the evaporation coil. Overflow for driving.
  • Insulation: 80 mm thick buffer injected in polyurethane foam and coated in aluminum. Manufactured in two parts that allows quick opening and access to the interior of the evaporator from the ceiling of the chamber, simply with 3 screws. Assembly of the ventilation kit (telescopic to adapt to different thicknesses) from inside the chamber, to facilitate assembly of the unit.

 

Adaptation to different ceiling thicknesses.

The new compact commercial rooftop units are supplied with a separate evaporator fan box and are mounted telescopically, thus adapting to roof panels from 80 to 150 mm thick.

esquema de montaje para la INTARTOP PRO R290

 

  • R-290 refrigerant charge.
  • Independent refrigerant circuit per compressor.
  • Hermetic compressors mounted on rails to reduce vibrations.
  • Condensing coil in microchannel with polyester paint treatment.
  • AC evaporator fans, and EC in condenser.
  • High pressure switch.
  • Stainless steel condensate tray, removable for cleaning, and stainless steel coil.
  • Washable suction grill filtering blanket.
  • Drainage resistance in self-regulating LV models.
  • Removable buffer with fixed part, for the passage of 80 mm pipes and wiring.
  • Access to electrical panel with hinged register.
  • Hot gas defrosting.
  • Expansion by thermostatic valve.
  • Aluminum plates covered with film for protection in transport in evaporator.
  • Multifunction electronic regulation with remote control and 5m of halogen-free hose.
  • LED chamber light.
  • Radial fan.
  • Vertical impeller.
  • Adaptation to a pipe pipe.
  • Male base and female plug for industrial connection.
  • Voltage control in single-phase models.
  • Voltage control and phase failure in three-phase models.
  • Power supply changeover to 230V 50 Hz in three-phase models.
  • Water condensation. Input range +5 ºC / +50 ºC.
  • Water condensation in the range -10 ºC / +5 ºC (only in MT models).
  • Drainage resistance (for chamber temperature < 0 °C in MT models)

Technical brochure
CE conformity certificate