intarblock
Commercial monoblocks
Self-contained monoblock units for wall-mount installation in small cold rooms at positive and negative temperature.
- Description
- Features
- Optional
- Dimensions
- Documentation
Description
intarblock is a self-contained monoblock units for wall-mount installation in small cold rooms at positive and negative temperature.
- Compact unit with reduced refrigerant load, less than 2 kg.
- Tropicalised design for high ambient temperature up to 45 ºC.
- Thermostatic expansion valve.
- Hot gas defrost with temperature control.
- Units exempt from leak checks.
intarblock series:
- CV-N: Monoblock units ready for quick installation through cold room wall and removable through-wall insulation pad for drop-in frame mounting.
- CV-C: Centrifugal version units featuring a centrifugal motor fan for ducted outlet of condenser hot air.
- CV-I: Weatherproof monoblock units for outdoors installations at positive and negative small cold rooms.
- 230 V-I-50 Hz or 400 V-III-50 Hz power supply. Available in 60 Hz. Other voltages by request.
- R-134a or R-449A refrigerant load, below 2 kg.
- Hermetic reciprocating compressor.
- High pressure switches.
- Thermostatic expansion valve.
- MCB protection.
- Hot gas defrost.
- Stainless steel drain pan.
- Evaporation of condensed water.
- Cold room lamp and door micro-switch cable.
- Door heater cable (only for BCV series).
- Removable through-wall insulation pad included.
- Multifunction electronic control.
CV
- Change to 400 V-III-50 Hz power supply.
- Door micro-switch.
- Non-return damper (centrifugal version).
- Adaptation of air discharge to circular duct.
- Evaporator coil epoxy anti-corrosion treatment.
CV-I
- Change to 400 V-III-50 Hz power supply.
- Door micro-switch.
- Condenser coil polyurethane anti-corrosion treatment.
- Evaporator coil epoxy anti-corrosion treatment.
- Male and female schuko electrical connector base.
- Low voltage protection (single-phase models).
- Low voltage and phase sequence protection (three-phase models).
