Equipo semicompacto de refrigeración a alta temperatura - INTARCON

High temperature

Refrigeration split units

Refrigeration split units for high temperature

Request technical advice

Description

High temperature refrigeration units specially designed for applications in working or packaging rooms and many other places at high temperature, with a double-flow low profile evaporating unit to guarantee the health and comfort conditions by  low-speed air distribution.

These units integrate an advanced electrical board to control temperature with a remote control keyboard, comprising fast cooling and night mode  to improve energetic efficiency.

High temperature systems are available in three configurations:

  • ASF-D series: low-noise self-contained condensing unit designed for outdoors installation (with triple acoustic isolation suitable to work under extreme ambient temperature up to 50ºC) and a double flow low-profile evaporating unit for elevated temperature, from 1,9 to 17,6 kW.
  • ASH-D series: horizontal axial self-contained condensing unit (for indoors installation) and a double flow low-profile evaporating unit for elevated temperature, from 1,3 to 12,2 kW.
  • ASH-CD series: horizontal centrifugal self-contained condensing unit (for indoors installation, and for ducting outdoors the hot condensation air flow) and a double flow low-profile evaporating unit for elevated temperature, from 1,3 to 12,2 kW.

 

  • 230 V-I-50 Hz or 400 V-III-50 Hz power supply. Avaible in 60 Hz. Others voltages by request.
  • Reduced refrigerant load.
  • Hermetic reciprocating compressor.
  • Passive relative humidity control.
  • Low-noise double flow low-profile evaporating unit.
  • High pressure and low pressure switches.
  • Liquid receiver.
  • Refrigerant precharge for up to 15 m pipe length.
  • Thermostatic expansion valve and solenoid valve, integrated in evaporating unit.
  • Air defrost.
  • MCB protection.
  • Drain tray.
  • Flare type connections (ready to solder in 1/2″-3/4″) with service valves.
  • Multifunctional electronic control with remote control board and digital regulation of condensing temperature.

ASH series

  • Change to 400 V-III-50 Hz power supply.
  • Crankcase heater.
  • Proportional control of condensing pressure:
    • Axial version (D): 3/33 and 4/43/44 series.
    • Centrifugal version (CD): 4/43/44 series.
  • Vertical air flow (centrifugal version).
  • Rectangular to circular exhaust air adaptor.
  • Built-in oil separator.
  • Anti-corrosion evaporator coil coating.
  • Anti-corrosion condenser coil coating.
  • Condensed water pump.
  • Larger sized multifunction electronic control.

ASF series

  • Change to 400 V-III-50 Hz power supply.
  • Proportional control of condensing pressure through fan speed variation (already included in 2/23 series and above).
  • Coil protection grille.
  • Built-in oil separator.
  • Anti-corrosion evaporator coil coating.
  • Anti-corrosion condenser coil coating.
  • Condensed water pump.
  • Larger sized multifunction electronic control.

Split

Technical brochure
CE conformity certificate